Professional Finishing and Leveling Implements / Tractor Services Products Page

HOME / ABOUT US / SERVICES / SITE WORK / PRODUCTS / ORDER

ROADS / DRIVES / ALLEYS / RAMPS & PADS / DRAIN SYSTEMS / LAND CLEARING / GENERAL

Professional Finishing and Leveling Implements

The

A-Series GC Blade / with Float Plate

and

B-Series GC Blade / with Float Plate & Attachment Brackets

Optional Attachments

Dozer • Ripper • Roller • Rock rake

(Fits All Tractors With Category 1 & 2, Three (3) Point Hitch Assemblies)

Can be Modified to Fit 4 Point Hitch Assemblies

Designed For

LANDSCAPING / DRIVEWAY & ROAD RESURFACING / SPORTS FIELDS / PARKS / TRACKS ARENAS / FOUNDATIONS / CONSTRUCTION REPAIRS / FARMS / RESORTS / GOLF COURSES

A1201: $700

The A-Series Basic Light Duty GC Blade Base Frame, 2ft x 5ft. An excellent choice for the Home Owner or the Professional for Lawns, Construction Site and Gravel Road Repairs. Floats nicely and loads up when nose adjusted down, by center link, to bite into surface adding desired weight. While dragging High spots, like gravel road centers or site bumps, rock or dirt will build up over nose and spread to sides then filter into low spots through screen. Slow and experienced 3 point control will result in even surface distribution to level. This same process can be used to level bumps caused by Front Tractor Loaders after pack or float pulling to level. Sometimes just a simple drop onto the bump with the GC-Blade and a 3 inch pull will totally eliminate the bump. Float Plate finishes smooth surfaces for seed bed but also pushes and scrapes like dozer blade when in the up position.

B1203: $1,400

The B-Series Extra Heavy Duty Base Frame / with Attachment Brackets that will accommodate all available optional attachments currently designed and those yet to be born. All B-Series Models are modified A-Series designs with attachment brackets to allow for a wide variety of applications. This Baby is a BRUTE. Choice for the Home Owner but designed with the Professional in mind, for Extra Heavy Duty applications. We’ve used it to level 7 inch quarry rock and that was a breeze. We recommend a BOX scraper for anything bigger but this BABY can still hang in there if you need it.

Leveling rock roads in the rain works fine with this model. Just avoid mixing clay mud with the rock to avoid plugging the 3” x 6” screen. Yes it will plug even with 3/4” rock if mixed with clay mud in heavy OREGON rain. An 18” prybar is useful in punching the plug through and avoiding the Clay. If you don’t need the attachments the A-Series Base Frame model without the Brackets is available: the A1203 is only $900, refer to the ORDER Page.

R5001: $675

The 11 Point Ripper Attachment was designed to REMOVE high spots and gradually rip down hard packed bumps and unleveled areas, a little at a time. Recommended for Site Preps for pools, lawns, ruts, even gravel roads. It’s primary function is to loosen and tear just below grade of the Base Frame, not break up rock. We recommend a BOX Scraper and Scarifiers for that. Secures conveniently out of the way when finished, without removing from the Implement. The Rock Rake and Roller can also be attached to the Base Frame while the Ripper is still attached but the Float Plate needs to be removed first. It slips easily off the heavy duty hinges with no pins to remove. This Baby is really MEAN and adds ballast to over all Implement weight.

D5001: $625

The Dozer Blade Attachment really adds character to the B-Series Base Frame. When in the down position, the blade edge is level with the grade of the base frame allowing it to shear off high spots when floating from the desired level areas. When not in use it easily secures up out of the way without removing from the base frame. In this up position you can attach the rock rake to the front brackets if you want to level out the freshly loosened soil as with tracks and horse training arenas.

B1203 / D5001 & R5001: Combo Package $2,600

This Combination Extra Heavy Duty Package is Incredible. Look how SWEET this set-up is. The ballast weight is choice for moving a lot of gravel with the front loader. The weight however does require that you develop expertise on the 3 point control, especially in soft soils. We are in the process of designing a Screen Attachment for the Extra Heavy Duty Models for applications in Sandy and Soft soils, to allow for better floating, and will be available later this year. A Note about those Rippers: Be careful. They are sharp. I’ve cut my arms and legs a couple of times on them.

• For More Information Click On A Button Below •

HOME / ABOUT US / SERVICES / SITE WORK / PRODUCTS / ORDER

ROADS / DRIVES / ALLEYS / RAMPS & PADS / DRAIN SYSTEMS / LAND CLEARING / GENERAL